RF Remote TOUCH LED Controller


RF Remote Touch RGB LED Controller

Can be used with both 12V and 24V tape.

Output : 3 channels @ 6A max 18A total



17 in stock



RF Remote Touch RGB LED Controller

RGB LED touch controller is a fun, easy to use accessory for your LED tape. Can be used with both 12V and 24V tape.

Either use preset modes, or dial a specific colour on the touch colour controller.

Also use the remote control to dim, and turn on/off. This unit has a memory setting, and will remain on the last setting if switched off at the wall.

The kit comes boxed and complete with user manual, simple-to-install input/output receiver and capacitive touch colour wheel handheld controller.

RF frequency: 433.93MHZ

Effective Distance: 20m

Input Voltage: 12vdc – 24vdc

Requires 3 x AAA cells

Handy output leds integrated into driver to show operation

Driver external dimensions: L126 x W50 x H26mm

Remote external dimensions: L114 x W56 x H22mm

One controller will operate many drivers

Additional information

Weight 0.3 kg
Dimensions 14 x 7.7 x 6 cm


IP Rating

IP20 (indoor)


12 to 24 Volts DC